Outer Limits 4x4 Board

Just wondering if anyone had done a stainless snorkel on a Desiel 80?

Would you do it again?

Any Pics???

I have some stainless cheap think I might go with it, might be able to do the whole job for under $400

Anyone??

duck has one on his




Also got another mate with one his 80 too

Thanks mate

I have some 3inch but looks like 4 inch will be the go! DOH!

Jason from JT Fibreglass in Bayswater has a cool 80 with a one piece 4 inch snorkel, looks sick, forget where he got it done. Try contacting him.

I did mine 80 snork in SS with rubber bends. I used some polyethylene (PE) mounting blocks riv-nutted to the guard, and some SS strap around the pipe to the PE blocks, with a Donaldson ram-head thingy on top.

Was easy to do, looks neat, works well, doesn't leak and cost me very little.

Yes. I would do it again.

P.S. I used 3" as that is the size of the inlet on the airbox and couldn't see any point using larger pipe than the inlet....

BushTuckerNed wrote:duck has one on his




Also got another mate with one his 80 too

wow thats my 80

go 4' looks much better, i teck screwed it into the gaurd and made some bracket at the top, easy to do and dont leak at all

IMHO... you might not need 4" dia pipe, but they look allot better than going 3", and if your going for polished stainless, the looks department are fairly important

LOL Yeah True!

call millweld in bayswater he makes them to fit & no poxy rubber bends all stainless bends & tig welded

Thanks mate