Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

elongated holes on gu diff

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 16
Joined: Mon Aug 13, 2007 6:11 pm
Location: gold coast Qld

elongated holes on gu diff

Post by coil60 »

hi i am putting drop boxs in my gu and noticed the front radius arm bolt on both sides of the diff has elongated there for the bolt is sloppy...has anyone had this before is so how did you fix it any help appreciated.


Cheers Aaron
Top
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Post by Z()LTAN »

previous owner has done the dodgy the get more flex out of the front end...
Locktup4x4.com.au - For all of your hardcore gear

Outlaws4x4.com
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

this is common, loose bolts can cause this. You could fix it by welding washers/plates with a neat hole to the outside or use a peice of copper on the inside, weld the worn section, dress it back with a grinder and die grinder.

You should be able to just tighen the bolts to clamp it inplace, how far is it elongated?
Top
Posts: 16
Joined: Mon Aug 13, 2007 6:11 pm
Location: gold coast Qld

Post by coil60 »

thanks for the replys. There elongated about 3mm towards the front and back.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 131 guests