Outer Limits 4x4 Board

Posted: **Sun Mar 21, 2004 9:17 pm**

I have been wheelin my rig for a while now and thought its time to try and finish what i started so i got stuck in this weekend and it looks a lot better now.

Posted: **Sun Mar 21, 2004 9:20 pm**

Havent finished the centre section because i have to fill the 60ltr Jaz fuel cell from the centre which is proving to be a PITA so im going to build an alloy cell and fill it from the side. I will then cover it.

Posted: **Sun Mar 21, 2004 9:23 pm**

A 38/12.5 TSL will fit laying flat as long as i de-flate it which is no problem with an engine driven compressor. My 35s should fit without de-flating.

Posted: **Sun Mar 21, 2004 9:25 pm**

Even mounted some mud flaps

Posted: **Sun Mar 21, 2004 9:31 pm**

I hate Mudflaps but i need to try and limit any reasons for getting pulled over.

Posted: **Sun Mar 21, 2004 9:34 pm**

Posted: **Sun Mar 21, 2004 9:36 pm**

Posted: **Sun Mar 21, 2004 9:38 pm**

Looking great Ruff !!!!

So it's 98 % complete ?

Posted: **Sun Mar 21, 2004 9:40 pm**

Mad Cruiser wrote:Looking great Ruff !!!!

So it's 98 % complete ?

I doubt it will ever get to 98%

I still need to finish the front bar and lower screen cross brace and over the top of the guards. Also replace the RH front guard and LH door. Finish my half doors. And re-build my front springs. Then i will be happy for a little while

Posted: **Sun Mar 21, 2004 9:41 pm**

looking good :armsup:

Posted: **Sun Mar 21, 2004 9:45 pm**

RUFF wrote:
Mad Cruiser wrote:Looking great Ruff !!!!

So it's 98 % complete ?

I doubt it will ever get to 98%

I still need to finish the front bar and lower screen cross brace and over the top of the guards. Also replace the RH front guard and LH door. Finish my half doors. And re-build my front springs. Then i will be happy for a little while

Doesn't sound so bad....

Better than mine, currently being stripped down and replacing the chassis

Posted: **Sun Mar 21, 2004 11:04 pm**

sweet!

Posted: **Sun Mar 21, 2004 11:13 pm**

The mud flaps look crap :finger:

Ive been putting off doing then on mine for that very reason

No offence intended

Posted: **Mon Mar 22, 2004 7:08 am**

looks like you should of mounted those flaps a bit futher back, cos when you chuck it in reverse the swampers might roll em up onto the tire :?:

Posted: **Mon Mar 22, 2004 7:26 am**

MY45 wrote:looks like you should of mounted those flaps a bit futher back, cos when you chuck it in reverse the swampers might roll em up onto the tire

They are right on the corner of the tray now so i couldnt go back any more. I still need to add a chain to them to hold them back. They will be able to be rolled up out of the way when off road.

Posted: **Mon Mar 22, 2004 7:27 am**

dave wrote:The mud flaps look crap Ive been putting off doing then on mine for that very reason
No offence intended

Yes they look like Crap. But im not taking too many chances with this on road.

Posted: **Mon Mar 22, 2004 8:12 am**

That looks fantastic, I am soooo jealous, it is huge, plenty wide and looks like it would handle extreme conditions easely, it has heaps of lights, is full of shit and has a fridge, it even has a dumpster with an Aussie flag out front
I am talking about the shed, I need one so bad, the lux is cool too of course :lol:

Peter.

Posted: **Mon Mar 22, 2004 8:20 am**

That tray looks sweet Ruff.
I agree the flaps look like poo but they are a necesary evil.
Paul.

Posted: **Mon Mar 22, 2004 8:53 am**

RUFF wrote:
dave wrote:The mud flaps look crap Ive been putting off doing then on mine for that very reason
No offence intended

Yes they look like Crap. But im not taking too many chances with this on road.

I totally agree i just havn't got to redgistering mine yet!
I will also have mud flaps hanging down like this and will look crap to,As you said i also wont to give the boys in blue as little as possable to pick on.
P.S The rest of the tray looks good, makes me wonder wheather i should have used alloy checker plate for mine very shinny :cool:

Posted: **Mon Mar 22, 2004 10:35 am**

This would have to be one of the toughest looking gen 2 Lux's ever. Great barwork. Shame u couldn't have made my tray Ruff, then I wouldn't still be dickying around with it.

I've spent many hours wondering how to make mudflaps look OK on my truck- thinking of bending up some solid plastic and maybe some chequerplate- soft rubber only seems to look worse with time.

However been driving around for about 3 months with nothing.

Does raise eyebrows.

Posted: **Mon Mar 22, 2004 10:49 am**

so are you driving this out to ormeau? on the 38's?

Posted: **Mon Mar 22, 2004 11:49 am**

looks hot.

Posted: **Mon Mar 22, 2004 6:22 pm**

antt wrote:so are you driving this out to ormeau? on the 38's?

I was going to drive the County out. As i said im not putting on a show out there

Posted: **Mon Mar 22, 2004 10:59 pm**

RUFF wrote:
antt wrote:so are you driving this out to ormeau? on the 38's?

I was going to drive the County out. As i said im not putting on a show out there

SKIRT

runs

Posted: **Tue Mar 23, 2004 1:12 pm**

droopypete wrote:That looks fantastic, I am soooo jealous, it is huge, plenty wide and looks like it would handle extreme conditions easely, it has heaps of lights, is full of shit and has a fridge, it even has a dumpster with an Aussie flag out front
I am talking about the shed, I need one so bad, the lux is cool too of course
Peter.

Pete .. have you been taking your medication .. ?? :shock:

if so ... may be time to up the dose ...

Posted: **Tue Mar 23, 2004 1:31 pm**

love_mud wrote:
droopypete wrote:That looks fantastic, I am soooo jealous, it is huge, plenty wide and looks like it would handle extreme conditions easely, it has heaps of lights, is full of shit and has a fridge, it even has a dumpster with an Aussie flag out front
I am talking about the shed, I need one so bad, the lux is cool too of course
Peter.

Pete .. have you been taking your medication .. ?? if so ... may be time to up the dose ...

Maybe, I haven't watched Gerry Springer for weeks now and I am feeling a lot better.
Peter.

Outer Limits 4x4 Board

Finished most of my tray today.

Finished most of my tray today.

Finished most of my tray today.