hi, I've just put a 4sp auto into my 84 range rover and the gear selector cable is a tad frayed and damaged. the main problem is the cable slips out of the bracket and therefore doesn't line up and wont sit in park or even go into reverse. (i kinda miss my reverse gear.)
just wondering what my options are, worth looking around for a 2nd hand 1?, trying to get a new 1? or maybe any1 knows if there's an aftermarket quick shifter available?
thx.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Shifter?
Moderator: Micka
Matt-w it is a ZF as stated in the original post.
Best bet would be to get another cable or complete shifter.
You could go a B&M or hurst but you would have to make your own brackets as they arnt able to supply any for the ZF.
The original cable and shifter when working properly do work very well.
Cheers Nottie
Best bet would be to get another cable or complete shifter.
You could go a B&M or hurst but you would have to make your own brackets as they arnt able to supply any for the ZF.
The original cable and shifter when working properly do work very well.
Cheers Nottie
Who is online
Users browsing this forum: No registered users and 0 guests