Outer Limits 4x4 Board

Posted: **Mon Nov 10, 2008 10:48 am**

Hi guys

Can anyone local to Brisbane let me measure up the location of a factory gearbox mount so I can install a 5 speed into my shorty? Its the crossmember that mounts to the front bottom of the gearbox...

would like to drop round and measure it up and take some photos... this weekend would be best...

Cheers

Posted: **Mon Nov 10, 2008 12:56 pm**

where in brissy are you?

if you can come past milton during the week you can measure up mine..

its a BJ though not a FJ but has the 5speed.. SHOULD be the same .. ?

Posted: **Mon Nov 10, 2008 6:52 pm**

got a 5 speed in my hj47 if you want to measure send be a pm

Posted: **Tue Nov 11, 2008 6:14 am**

The chassis widths vary depending on the year model of your 40. A g/box cross member from an '80 - '84 model is 625 at the front and 640 at the rear as the chassis tapers. PM me if you need one. Cheers.

Posted: **Tue Nov 11, 2008 8:29 pm**

looks like i have the right crossmember so thanks turbo4t

pms sent

thanks

brad

Outer Limits 4x4 Board

Factory crossmember location for FJ40 Gearbox

Factory crossmember location for FJ40 Gearbox