Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ and GU front panhard bush size

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 130
Joined: Wed Jan 05, 2005 3:58 pm
Location: Gold coast

GQ and GU front panhard bush size

Post by Quadcamshorty »

hi guys,


Does anyone have the inside and outside diameters of the 'axle end' front panhard bush for a GQ and GU.

I have a flogged out bush from an adj rod that seems to be a weird size so any info would be great.

cheers
Last edited by Quadcamshorty on Mon Nov 10, 2008 7:51 pm, edited 2 times in total.
GQ shorty, turbo tb42, motec, 35 mt claws, cheezy bar, highmount, 3inch spring, 2inch body

Need an interstate courier? http://www.transdirect.com.au
Top
Posts: 52
Joined: Fri May 13, 2005 9:26 pm
Location: Melb

Post by snowy365 »

I just went and bought an aftermarket bush kit from Bursons.. fitted my lovells adj panhard perfectly..

Dont bother with Nissan they have no idea
Top
Posts: 249
Joined: Tue Jan 01, 2008 8:53 pm
Location: gulf country

Post by rogantriton »

hay mate, i flogged out both front bushes on my gu panard, nissan dont sell just the bushes anymore they want you to buy the whole bar. i just went to mick at superior and got 2 genuine nissan ones from him for $25 each and he pressed the old ones out and pressed the new ones in for free.
'08 BT-50: ARB winch bar and rails, Safari snorkel, Hella rally 4000 spotties, GME uhf, Dual battery, Long range fuel tank
Top
Posts: 130
Joined: Wed Jan 05, 2005 3:58 pm
Location: Gold coast

Post by Quadcamshorty »

thanks guys,


the problem i've got is that the inside diameter of my panhard is a lot bigger then the standard gq one.

I havnt pulled it out to measure it, thats why i thought it may be a gu rod by mistake. I bought it second hand so i don't know the brand of the rod.

Is the inside diameter of a gu bush the same as a gq??

cheers
GQ shorty, turbo tb42, motec, 35 mt claws, cheezy bar, highmount, 3inch spring, 2inch body

Need an interstate courier? http://www.transdirect.com.au
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

I have had no issues buying genuine bushes.

Nissan don't have a listing for just the bushes on the parts listings, but if you know the part numbers there easy to get.

Last ones cost me $16 each.

If nissan only sell whole panhards how did superior get some?

Only use genuine rubber bushes, poly will not last as long.

Here are the part no's for the panhard bushes
Diff end 55135-01J01
Chassis end 55135-01J10
This is for GQ & early GU
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

nastytroll wrote:I have had no issues buying genuine bushes.

Nissan don't have a listing for just the bushes on the parts listings, but if you know the part numbers there easy to get.

Last ones cost me $16 each.

If nissan only sell whole panhards how did superior get some?
The GQ ones if I remember are the same.. Its in the GQ part #'s thread I think..
GU's they want you to buy whole panhard! Just use the GQ ones.

Also helps having a dealer that gives a shit and knows stuff... Blackburn Nissan bloke handed me the parts over counter... he knew they are available... nice try Nissan..
Top
Posts: 52
Joined: Fri May 13, 2005 9:26 pm
Location: Melb

Post by snowy365 »

The GU bush is bigger on the axel end than the GQ bush.. Is on my 99 Gu anyway.. so that may answer the question.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

snowy365 wrote:The GU bush is bigger on the axel end than the GQ bush.. Is on my 99 Gu anyway.. so that may answer the question.
i knew something was the same - front and rear :oops:
http://www.outerlimits4x4.com/phpBB2/ft ... ht=panhard
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

I have done suspension work on shit loads of GQ and GU and never seen the diff end different, chassis end did change to a large spherical bearing on later GU though.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 37 guests