Page 1 of 1
mounting a toolbox in my sierra
Posted: Wed Nov 12, 2008 9:27 pm
by me217
hey i got a small toolbox and i wanna mount it in my sierra i was thinking of using the seat mount holes but i want to be able to remove it quickly when im working on my car. any ideas on mounting would be great.
me217
Posted: Wed Nov 12, 2008 9:39 pm
by want33s
I use an ammo box for tools. It is held in with a ratchet strap so it can be removed easily to take tools to job and ratchet strap can be used for 101 things too.
Jas.
Posted: Wed Nov 12, 2008 9:41 pm
by me217
cool but i was hoping for some sort of bracket that i can bolt on the toolbox and to the car and they clip together.
me217
Posted: Wed Nov 12, 2008 9:44 pm
by spamwell
i have had mine bolted into the seat mounts in my sierra for the past three years and have taken it in and out a few times only takes like ten minutes. Personally i think it is a good way to do it. i have padded the inside of mine with closed cell foam aswell so i can do whatever i want and it never moves and the satuff inside makes no noise !
i just use the four seat bolts and i drilled holes in the bottom of the toolbox for them.
Posted: Thu Nov 13, 2008 3:35 pm
by lump_a_charcoal
I have mine mounted under the bonnet, on the LH inner guard.
Just need to mod the jack holder and washer bottle setup, and it is great.
Posted: Sun Nov 16, 2008 2:19 pm
by GRPABT1
Finish that bar spamwell.....
Posted: Sun Nov 16, 2008 7:47 pm
by spamwell
lol it's currently more finished than that, well it is black atleast