Outer Limits 4x4 Board

Hi all !

I have a Feroza "90 F-300 carby ....

I was just wondering if you guys knew the best way to do this....
Or if someone already has done it, then I would like to know what
I have to keep in mind.

Also, what do I need and what do I have to change...

Thanx !

Oddur

Its not a small job.. I would recomend that before we start discussing individual bits you download the F300 manuals form www.warfs.org

This covers both systems and you will be able to see exactly the range of changes required.

MightyMouse wrote:Its not a small job.. I would recomend that before we start discussing individual bits you download the F300 manuals form www.warfs.org

This covers both systems and you will be able to see exactly the range of changes required.

Thank you, I will look into it and see what I need...

But Im planning on buying a spare car witch is a Feroza F300 EFI "92
I would take all the parts needed from that car...

I just don´t know where to start....

Best regards
Oddur

is there any reason you just keep that car and swap bits from your carbie to that one?

Newtothefourbeworld wrote:is there any reason you just keep that car and swap bits from your carbie to that one?

Great idea haha

I have thought about that too but the other car is dented alot and in very bad shape except for the engine..... And my first feroza has so much sole that I don´t think I could ever do that to her .

It´s hard do decide, I´ll think about it, maybe that is a nice project this winter haha

Thanks guys

Ok - now we have a better grasp of your scheme - I'd say its reasonably simple to do - especially with a manual and a donor car.

Having the bits will make all the difference.

Things to check...

The oxgen sensor isn't stuffed, they have a 150,000 km approx lifespan max.

The TPS isn't stuffed - lots of posts on this problem already......

Fit a new fuel filter whilst your at it.

Just swap the engines