Outer Limits 4x4 Board

has any one used the ebay 2inch lift kit for coilys?????

some people have mention on here peters etc...

coily guys what do u have? what did you pay? and what do u think of it?

Edit

http://cgi.ebay.com.au/40mm-SUSPENSION- ... 240%3A1318

thats the kit...

i can see they are king springs now!

With suspension most often you get what you pay for. This will do the job but king springs have been known to be too stiff for sierras in leafy applications, I wouldn't wanna be the one to find out if the same is true for coilys

It's what i have in mine and they work fine.

My front struts are completly stuffed and bent far enough that the tube rubs on the spring, but that's mostly due to them being bent from breaking front arms.

The front struts would be better if they extended a little more though.

yer i have this kit on my coily, its alright not to stiff, iv loaded the back up once and it did sag a bit but other than that it sits level all the time, and it flexes alright for what it is.





cheers scott

hey mate,

i'v got one of those kit's, it's pretty good quality and is nice and soft off road. Flex's good, considering that it's a front strut set up, once the sway bar is removed. I'm selling my kit thats had about 1,000kms on it due to me putting the car on the side and buggering up the window frame , so i'm selling the car as is to someone but i'm going to take the suspension out as it's still mint. Pm me if your keen, will be heaps cheaper then what the ebay guy has them for

i wouldnt buy them mate
pedders did my whole front and rear from custom and didnt cost too much once we knew what we needed i had about 3 systems until i was happy with the final result
got alot more down travel and up to 3 inch lift aswell
talk to pedders

sell it and get a leafy