Page 1 of 1
doing the rear axle seal in my 75
Posted: Tue Nov 25, 2008 8:58 pm
by sprungupcruiser
i've been looking at the exploded view of the rear axle of a 75. the way the picures has been done it looks like the seal is near the diff? is that just the way the drawing is done? i would have thought the seal would have been at the hub end of the axle housing. anyone who has done one before advice would be great, cheers
rob
Posted: Wed Nov 26, 2008 7:25 pm
by jimmy_ricard
mate the seal in question is located on the very outer tube of the housing. pull your axle out and you will see it straight away.
Posted: Wed Nov 26, 2008 8:21 pm
by sprungupcruiser
thought so, thanks mate
Posted: Thu Nov 27, 2008 7:50 am
by turkey
Just done this job myself on my 75 mate, its a piece of piss takes about 30 - 40 mins per side and that was doin the bearings as well. Just be careful with the new seal as there is a small spring in there...
Posted: Thu Nov 27, 2008 3:18 pm
by sprungupcruiser
ohh cool, should get it done this weekend then.