Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Torque Settings For 3L Need Help ASAP

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 92
Joined: Mon Jan 31, 2005 7:47 pm

Torque Settings For 3L Need Help ASAP

Post by Mud_5lut »

hey guys just bout to drop my box out in the morning, need help finding the torque settingd for the flywheel so i can take it to get machined and put back on, also need torque setting for clutch plate, using a heavy duty PBR clutch. thanks guys.
Top
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

I can look it up tonight, but not near the manual at the moment.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Top
Posts: 19
Joined: Sat Aug 13, 2005 4:13 pm
Location: caboolture

Post by T/belt »

Flywheel bolts ; 90ft/lbs . From Toyota repair manual No .RM123E .
There are no spec's for the clutch plate . Cheers.
Top
Posts: 92
Joined: Mon Jan 31, 2005 7:47 pm

clutch

Post by Mud_5lut »

thanks for the replies guys really appreciated.
Top
Posts: 19
Joined: Sat Aug 13, 2005 4:13 pm
Location: caboolture

Post by T/belt »

You're welcome
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 75 guests