Got a loan of 16" 80 Series Mags from a Wrecker put them on the front of my HJ61 and the steering arm (Pitman?) hits the mag (aluminim Toyota wheel) This is NBG. (No problem with the calipers)
Talking to ROH Headoffice they suggest a Steel 16x8 with a -8 Negative offset, this will push the wheel out 1.3cm alternatively a 16x7 witha 11 negative offset.
I understand the 60 series has a zero offset and the 80 series a +3 offset.
Would appreciate your comments on the offset and the brand you have used.
Am looking at Sunraisers probably the 7" with an offset and will spray them a metallic silver, with 265/70R16 tyres.
My understanding is that negative offset pushes the wheel out, postive closer to the body.
Thanks for replies
Peter
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
16 Inch Wheels on a 60 Series Cruiser What offset is needed?
Moderators: toaddog, Elmo, DUDELUX
Who is online
Users browsing this forum: No registered users and 2 guests