Page 1 of 1
Urgent need help with injectors
Posted: Mon Dec 01, 2008 10:26 am
by wasfishing
trying to put a mates jimny back together and the injecotors dont seem to be sealing with the injector rail. is there anything speacial your supost to do to when refiting them?
Posted: Mon Dec 01, 2008 10:48 am
by joeblow
they have rubber o-rings on top and bottom of injector and are pre-loaded for a sealed fit when bolting the fuel rail down. did you drop or loose any o-rings?
Posted: Mon Dec 01, 2008 10:55 am
by wasfishing
im pritty sure there all there, any other posible reasons?
Posted: Mon Dec 01, 2008 12:55 pm
by wasfishing
no more fuel leaking, but it wont start, has no spark for some reason.
Posted: Mon Dec 01, 2008 1:26 pm
by FC3892
no spark ins't a fuel issue, to be sure u have fuel. crank it and make sure the plug is wet... should be easy to tell with no spark.... that issue will prolly be a small wiring issue at the coils or down that line!!!
Posted: Tue Dec 02, 2008 6:27 pm
by wasfishing
deff has fuel it spayed it all ova the engine bay lol
snapped the cam angle sensor, thats y it wont start