Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

clutch problem.

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 105
Joined: Fri Jul 04, 2008 8:47 pm
Location: brisbane

clutch problem.

Post by cspgq »

is there any way to seal the clutch from water, mud and shit? im on my second clutch in 6mths. :twisted: :bad-words:.
Top
Posts: 43
Joined: Thu Nov 20, 2008 11:52 am
Location: melb

Post by ronno88 »

not much else you can do but put the rubber boot on the clutch fork
and cover plate on bellhousing.
Top
Posts: 105
Joined: Fri Jul 04, 2008 8:47 pm
Location: brisbane

.

Post by cspgq »

ok then. well that sucks. thanks for the reply.
Top
Posts: 43
Joined: Tue Nov 25, 2008 6:15 pm
Location: brisVagas

mine is ok

Post by allisterrenee »

When i have a clutch done the boys in the shop put silicon all the way around the bell housing and fill the drain hole in the bottom. Also put some around the rubber boot for the clutch fork , I can sit in deep water all the time with no probs and have been doing it for years, A really good 4wd shop did it for me a long time ago and i have never looked back since,,, If you get under your car and look up at the bell housing you will see a little hole at the bottom( on a GQ) , this is one spot it comes in from alwell as the fork boot .. Hope this helps :)
Lifted turbo GU , 900blade .. TLR1000 "the dark side" , Boat ,
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 124 guests