Outer Limits 4x4 Board

does the ARB bull bar/winch bar bolt up on the inside of the chassis or the outside?

could some one please measure how far apart the bull bar/winch bar mounts are from each other?

I've been offered an ARB bull bar that has been modified to accept a low mount winch for $250.00 which I'm wanting to mod this bar slightly to fit on the front of my Terracan

TIA

OGJON

i have a arb high mount bull bar it has 2 bolts on top, 2 bolts on the bottom, and 2 small bolts on the outside.
slides straight into the chassie 650mm between the mounts.
hope this helps you

OGJON wrote:does the ARB bull bar/winch bar bolt up on the inside of the chassis or the outside?

could some one please measure how far apart the bull bar/winch bar mounts are from each other?

I've been offered an ARB bull bar that has been modified to accept a low mount winch for $250.00 which I'm wanting to mod this bar slightly to fit on the front of my Terracan

TIA
OGJON

Its illegal to fit a non airbag approved bullbar to a vehicle that has airbags.. if you have a accident you insurance will not cover you and the airbag will not deploy

The 80s bar is not airbag capproved just letting you know...

Copy what Bogan v8 said, and it will be the wrong width anyway.....oh well

If you had two terracans you could fit half on each one

I hate insurance crap but if you have insurance you have to play by the rules

thats why I dont have insurance!!!!! i have 3rd party property and a big bullbar

OGJON wrote:does the ARB bull bar/winch bar bolt up on the inside of the chassis or the outside?

could some one please measure how far apart the bull bar/winch bar mounts are from each other?

I've been offered an ARB bull bar that has been modified to accept a low mount winch for $250.00 which I'm wanting to mod this bar slightly to fit on the front of my Terracan

TIA

OGJON

Why dony you measure the one you already have...... or is this more of your c#$p........
You said on Wed Nov 26, 2008 10:28 am in another post that you had one????