Page 1 of 1
Who can fit Staun Internal Beadlocks ?
Posted: Tue Dec 02, 2008 8:54 pm
by CWBYUP
Looking for someone who can fit Staun Internal Beadlocks around Windsor in Sydney ?
Normal bloke dosent want to do it.
Nick
Posted: Tue Dec 02, 2008 9:02 pm
by ADEM
hi-tech at penrith just did the ones on my mates jeep bout 6 weeks back
beadlocks
Posted: Tue Dec 02, 2008 9:19 pm
by Hobzee
Try Nick Mannell, Mal at British and Swedish, Duncan at Macquarie or Rick at BBM.
I am happy to give over the phone directions from Melb to whoever takes it on...
Posted: Tue Dec 02, 2008 9:53 pm
by CWBYUP
thanks heaps guys.
Nick
stauns
Posted: Thu Dec 04, 2008 11:33 am
by MUD CLUB
Give it a go yourself its not that hard just remove all metal shavings after drilling hole
Posted: Thu Dec 04, 2008 12:09 pm
by chimpboy
Can I ask what a set of four of these are worth?
Posted: Thu Dec 04, 2008 1:47 pm
by Eddy
chimpboy wrote:Can I ask what a set of four of these are worth?
yep
Posted: Thu Dec 04, 2008 2:25 pm
by Guy
chimpboy wrote:Can I ask what a set of four of these are worth?
You have my permission ...
Posted: Thu Dec 04, 2008 2:37 pm
by CWBYUP
Posted: Thu Dec 04, 2008 4:52 pm
by strom80
I paid $115 each for mine to suit 15"X10" fitted them myself. bit of mucking around but not hard
Posted: Thu Dec 04, 2008 5:45 pm
by CWBYUP
strom80 wrote:I paid $115 each for mine to suit 15"X10" fitted them myself. bit of mucking around but not hard
Stauns or the copies ?
Nick
Posted: Thu Dec 04, 2008 11:31 pm
by Eddy
Paid $450 for a set of 15x7-8 S/H forget what they were new at the time ...
They been in the shed gathering dust for a couple years now waiting for me to decide what I'm gunna do wit'em
Posted: Sat Dec 06, 2008 11:04 am
by strom80
CWBYUP wrote:strom80 wrote:I paid $115 each for mine to suit 15"X10" fitted them myself. bit of mucking around but not hard
Stauns or the copies ?
Nick
Sorry that was the rims. the Stauns were $225 and they were the old design
Posted: Sun Dec 07, 2008 8:28 pm
by Hobzee
CWBYUP wrote:strom80 wrote:I paid $115 each for mine to suit 15"X10" fitted them myself. bit of mucking around but not hard
Stauns or the copies ?
Nick
I think you will find the Stauns are the copies...
Posted: Mon Dec 08, 2008 8:05 am
by CWBYUP
Hobzee wrote:I think you will find the Stauns are the copies...
Please enlighten me.
Last set I saw that weren't stauns were crap quality and had chinese writting stamped on the outer casing.
If stauns are the copies what was the original ?
Link etc ?
Nick
Posted: Mon Dec 08, 2008 8:51 am
by Hobzee
CWBYUP wrote:Hobzee wrote:I think you will find the Stauns are the copies...
Please enlighten me.
Last set I saw that weren't stauns were crap quality and had chinese writting stamped on the outer casing.
If stauns are the copies what was the original ?
Link etc ?
Nick
First there was Tireloc (imported by Roger Smith) and it had a rubber flap prone to breaking at the valve.
Then Roger improved it with Simex tubes and his own bags with fabric tabs and these were called Secon Air.
Then Roger did a deal with Staun and made them for Staun - Staun now get them made elsewhere.
Roger has gone back to making Second Air
I am not aware of any with Chinese writing. If there is a chinese equivalent (wouldn't be surprised at all) then agreed it is a copy ... of a copy.
I know that years of improvements have gone into Second Air with quality tubes and fittings. I'd stick with that.
BTW, do you have inverted rims - super wide offset with the outers reversed. If so they can be a pain to fit without the right tools. Otherwise they are straight forward - just do 1 bead at a time.