Outer Limits 4x4 Board

hi all,i was wondering where one would find mounts for powersteering pumps to be mounted on a 350 chev in a 45 series ute,also for same engine in a hj60 are these purchasable and where would one source them
any help would be greatly appreciated

im still undecided on a replacement donk for the seized 2h in the 60,i have 2 40 series projects so might pinch the motor from one of those and work on the hj 60 extra cab project.just need to decide which 40 to part with,hmmmmm 76 45 ute with 350 chev and turbo 400 or the old mid 60,s 40 with 327 with the original 3 speed cruiser box bolted behind.
seeing as im chopping the 60 might part out the 45,bung the auto into the 40,decisions decisions,but something has to give,lol,my everyday car is a fj 60 also,so 4 cruisers is kind of over kill,might part out the bj and one of the fjs

Marks 4X4 adapters would have them. With my conversion I used the chev accessories rather than toyota - bit of stuffing around with the air-con and power steering hoses, but cheaper to replace chev/gm bits than toyota.http://www.marks4wd.com/

thanksmatetoom a while to find it but got there eventually,thats exactly what i was after