Outer Limits 4x4 Board

will they bolt straight up to a 2f

using the 2f bellhousing it will bolt straight up

thanks for that pc man

are the clutches,flywheels ecrt the same between hj and fj 60s

nope but 4 speed and 5 speed 2f stuff is all the same

ok so new bellhousing and clutch ect

im thinking of buying an fj 60 bodyshell on chassis and transfering all the hj60 diffs ect over,hj60 has a seized donk so prefer to use a 2f over a 2 h and run it on gas,the shell im looking at is in great nick,my hj shell is dented in most panels and been dodgily bogged in the roof gutters,a big job but will be fun,theres still a chance i will slot a chev in it to

richardsc wrote:thanks for that pc man

are the clutches,flywheels ecrt the same between hj and fj 60s

I will think you will find that the clutch kits will fit either(flywheels I don't know about).

I took my Safari Exedy H/D clutch kit into the local clutch & brake shop to see the difference and was no difference between the 2F & 2H ones in size. From memory the only difference was that the 2H had a higher pressure loading to the clutch to allow for the diesel torque.

I bolted the 2H H/D clutch up to the 2F flywheel and has been working ever since.. no probs!!

thanks brighty,much appreciated,im done with diesels,sticking with petrols on gas