Page 1 of 1
staun deflaters
Posted: Sun Dec 07, 2008 9:28 am
by lukeash
just found my old stauns, as im just getting back in the off road scene, iwas wondering if anyone can tell me how you set them up. i did it abou 6 years ago and now cant remember, anyhelp please
Posted: Sun Dec 07, 2008 9:35 am
by Skegbudley
1. Deflate spare tyre to desired pressure.
2. With lock ring and adjusting cap wound down, screw your deflator onto the valve stem.
3. Loosen cap (anticlockwise) until deflator pops open, then immediately tighten cap to the position where air stops coming out.
4. Turn lock ring up to adjusting cap and tighten.
Posted: Sun Dec 07, 2008 9:40 am
by PJ.zook
5. Put Stauns back on shelf and buy an EZ Deflator
Posted: Sun Dec 07, 2008 9:50 am
by Skegbudley
PJ.zook wrote:5. Put Stauns back on shelf and buy an EZ Deflator
Buy me one for Xmas and I will.
Posted: Sun Dec 07, 2008 12:14 pm
by lukeash
cheers mate for the help, just what i was after
Posted: Sun Dec 07, 2008 12:57 pm
by ssfabricator
on this note any harm in giving them a spray with wd40 or the likes
woulld this harm the rubber seal
Posted: Sun Dec 07, 2008 1:27 pm
by lump_a_charcoal
Apparently silicone spray is better.