i have a 91 swb pajero, 3L V6 auto gen 2.
I was out in the mud in the weekend, and looked down and i had lost my green wheel lights, O/D light, and height control. i put a new fuse in and 10 minutes later it blew again, i was still in 4wd so i carried on for the day. when i got home i disconnected the black box under the radio and put in another fuse and same thing happened, i pulled out the ecu and checked for damage inside (have seen alot of mitsi computers that have melt downs) the only other thing i want to try is disconnecting the height control but i am unsure of where it is located. Any he 4wd lp would be nice or if some one has had same problem.
Also does any one have a electrical wiring diagram for for one of these.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
4wd fuse
Moderator: -Scott-
Who is online
Users browsing this forum: No registered users and 0 guests