Page 1 of 1
Tcase flange nut socket size?
Posted: Sun Dec 14, 2008 5:29 pm
by brendan_h
think this will be good for the bible.
what size socket do you use on the output flange nuts on the tcase?
and also the wheel bearing nut socket is that a 51mm socket?
Re: Tcase flange nut socket size?
Posted: Sun Dec 14, 2008 5:38 pm
by want33s
brendan_h wrote:think this will be good for the bible.
what size socket do you use on the output flange nuts on the tcase?
and also the wheel bearing nut socket is that a 51mm socket?
I can't remember the size of the T-case nuts.. About 30mm I think??? I don't have a spare case to measure.
The wheel bearing nuts are 50mm definately.
Jas.
Posted: Sun Dec 14, 2008 5:47 pm
by Mike E
i'm pretty sure i used a 27mm socket on mine
Posted: Sun Dec 14, 2008 5:50 pm
by brendan_h
30bucks for an impact socket need accurate figures
for the wheel bearings 50mm socket?
Posted: Sun Dec 14, 2008 6:00 pm
by Mike E
i went and checked and on my wt and nt case i used a 27mm socket
Posted: Sun Dec 14, 2008 6:32 pm
by brendan_h
thanks
Posted: Sun Dec 14, 2008 6:33 pm
by brendan_h
thanks
Posted: Sun Dec 14, 2008 6:38 pm
by want33s
brendan_h wrote:30bucks for an impact socket need accurate figures
for the wheel bearings 50mm socket?
You don't need accurate figures you need to search.
There is a few threads with this info in them.
'Swivel hub rebuild' is one.
Posted: Sun Dec 14, 2008 7:30 pm
by GRPABT1
we should bible the link to the trailgear case gears intructions though and probably Izook's build pages
Posted: Sun Dec 14, 2008 11:49 pm
by Adsport
24mm for 1.0L
27mm for 1.3L
Posted: Mon Dec 15, 2008 5:24 pm
by mrw82
Adsport wrote:24mm for 1.0L without switch
27mm for 1.3L and 1 litre with switch
Posted: Tue Dec 16, 2008 6:37 am
by Gwagensteve
mrw82 wrote:Adsport wrote:24mm for 1.0L without switch
27mm for 1.3L and 1 litre with switch
X2.
Steve.