Can anyone give me a hand- a friend of mine just asked me for this and all my Series LR bits are 60 miles away:
Sent: Tue 12/16/08 12:26 PM
To: Matthew Nelson
Matt, I am stuck at work...and need to know the diameter of the rover mainshaft at the output gear - the 10 spline gear that enters the transfercase....I am researching T18 shafts and have found some 10 spline shafts of different diameters...one is supposed to be very very close to the rover spline...John
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
to know the diameter of Rover mainshaft at the output gear
Moderator: Micka
From: Pamela And John Dorr (jopadorr@hotmail.com)
Sent: Tue 12/16/08 2:48 PM
To: Matthew Nelson
Got it....ford 10 spline 1 3/8 diameter...Rover transfercase gear - 10 spline 1 3/8 diameter...will fit snugly. Thus now just need to look at how to make a plate adapter.
Sent: Tue 12/16/08 2:48 PM
To: Matthew Nelson
Got it....ford 10 spline 1 3/8 diameter...Rover transfercase gear - 10 spline 1 3/8 diameter...will fit snugly. Thus now just need to look at how to make a plate adapter.
Who is online
Users browsing this forum: No registered users and 1 guest