Outer Limits 4x4 Board

G'day guys

As most of you probably know the standard suzuki seats aren't the pinaccle of ergonomic comfort and support in cars, however my seats in my vit are a particularly poor example, having torn along the seams and basically now devoid of comfort as the foam and springs go spongey.

Anyway, anyone put aftermarket seats in their zook before? I'm looking at a cheap $250 one from supercheap. Is it a pain in the arse to fit seats? I had a look underneath, my seats and couldn't quite work out how new seats would fit??

Cheers

Here's one on Sierra.

http://www.outerlimits4x4.com/ftopic130749-0-0-asc-.php

Put a pair out of late baleno similar to the GTI swifts.
Paid $250 the pair.
Drivers side needed small mods on the outside rail, passagers none.

fitted monza racing seats in mine from autobahn
had to make all new mounts but used the seats rails
slides fine and reclines fine
used 6mm plates

if you search the bible all your answers will be there

good luck

Is this thread the reepoost or the other one?

Beautiful, cheers guys

Don't forget the engineers certificate....

at least in Qld.

Spock