Outer Limits 4x4 Board

need to see some to get an idea of wat to make

I'm 96% certain there's a thread on this.

joel i think you will find its more like 95 %
pmsl

no no, im sure its only something like 83.8% sure

has been done but heres mine not finished yet but you get the idea. Its based on an old school arb bar

that is the most pedestrian freindly bar I have seen, Everyone will be running away screaming at how ugly it is that they wont get hit by you.

Man that thing is ugly, ARB are ugly but what have you done

The bar on my 75

now that looks tuff

thats nice was it a tjm or arb bar or neither ? looks Good

I knocked this one up just in time for my xmas trip

BeauGQ wrote:thats nice was it a tjm or arb bar or neither ? looks Good

Was an ARB bar, not any more!!!! Winch frame is made of 6mm plate with some 8mm gussets and mounting renforcements. The top tubing and number plate mount is all the is left of the orginal bar.

struth, put up a pic of ya stainless one... i know how fond of that you are...

macca81 wrote:struth, put up a pic of ya stainless one... i know how fond of that you are...

All such pics will soon be destroyed

the rear bar on my 40.. now has wheel carrier

thats wat i had in mind but 3 inch top peace

with 35's fitted

My 60 and my brothers 75

here ya go mate i built this one for my 80 myself.

and heres me rear bar. i tried to keep em both sort of factory looking to avoid attracting attention from the boys in blue.

i like ya rear bar andy

and in regards to your sig, yes, every single time im driving...

cheers mate the main piece across the back is 150x150x8 angle and i just folded the sides up out of 3 mm and braced it back to the chassis. i had to build it to suit a 2" body lift so i just packed it up with 50x50 box where it sat ot the chassis. took a bit of time and thinking but having all the right gear helped a lot.

here is a couple of my 75

here is one of my bundera


and a 100 i found on the net


Evan

[quote="Struth"]I knocked this one up just in time for my xmas trip

Howdy Struth,

That bar is mint, pm me with a price if you would be willing to knock one up for a 2000 model flared guard Hilux. I'm in vic as well. (Non winch)

Cheers

Darren

DASH123 wrote:

Struth wrote:I knocked this one up just in time for my xmas trip

Howdy Struth,

That bar is mint, pm me with a price if you would be willing to knock one up for a 2000 model flared guard Hilux. I'm in vic as well. (Non winch)

Cheers

Darren

PM on the way

G'day struth, i'd be interested too, if u didn't mind knocking one up for a 92' model hilux, pm me if you are interested, thanks.[/quote]

virtha21 wrote:G'day struth, i'd be interested too, if u didn't mind knocking one up for a 92' model hilux, pm me if you are interested, thanks.

[/quote]

PM on way

and a couple more pics so you know what it looks like,

has anyone got a tube front bar for a ln106 they wanna sell cheap or swap for my tjm winch compatible bar cheers

STRUTH just out of interest how much it cost you to knock that up, you wouldnt have any drawing designs or a break down of how you built it, looks really nice, wouldnt mind something like that on my 80 series.