Page 1 of 1
tubbing firewall in hilux
Posted: Sun Jan 04, 2009 10:19 pm
by TUF-35T
hey guys im looking into tubbing the firewall of my hilux
for clearance when i go down to a one inch body lift (from 3 inch)
any help or pics appreciated
i know a few guys have done it but im having no luck finding pics
cheers shane
Posted: Mon Jan 05, 2009 8:54 pm
by Twistinchassie
look on pirate4x4 they have a write up or it might be trailgear's forum.. also try the minitrucker scene my mate owns a customs shop and dose it oftern..
Posted: Tue Jan 06, 2009 11:37 am
by Frankenyota
Also look into moving your front axle forward for tyre clearance?
Matt
Posted: Tue Jan 06, 2009 2:47 pm
by Weiner
Posted: Tue Jan 06, 2009 9:52 pm
by TUF-35T
none of the pics are workin mate
Posted: Tue Jan 06, 2009 9:57 pm
by TUF-35T
Frankenyota wrote:Also look into moving your front axle forward for tyre clearance?
Matt
done that already mate
cheers shane
Posted: Wed Jan 07, 2009 6:23 pm
by RUFF
Sorry i dont have time at the moment to link the pics but the missing pics for the above linked thread can be found in this album-
http://s214.photobucket.com/albums/cc9/ ... s/?start=0
Posted: Wed Jan 07, 2009 9:56 pm
by TUF-35T
cheers mate exactly what i wantedon the drivers side did you have to bend the excelarator pedal so it would work properly or was it fine
cheers shane
Posted: Thu Jan 08, 2009 7:46 pm
by RUFF
TUF-35T wrote:cheers mate exactly what i wantedon the drivers side did you have to bend the excelarator pedal so it would work properly or was it fine
cheers shane
I cant remember if i had to bend it or not. But it defianatly still worked afterwards.