Outer Limits 4x4 Board

hey guys looking at a 4"spring lift for me lux just wondering what problems i might incounter with doing this ?
things to break ect..

I redid the suspension in my lux about 1 month ago
Sat too high at first, but now has settle to a perfect hieght i rekon

i used:
EFS 3 inch heavy duty leaves
Superior extended shakles
Rancho RS5000
extended brakelines
dropped deaglink ( i got a shorter one and moved the diff forward 35mm at the same time)
adjustable torque bar

Also extended the front drive shaft.

this setup works well for me. front flexes pretty well and rear is still hard to carry weight for work.

yeah i have a tourqe bar n extended break lines ect i just wondering if there is troube with uni joints n shit

wayneb wrote:yeah i have a tourqe bar n extended break lines ect i just wondering if there is troube with uni joints n shit

Probably will need new front tailshaft. The double cardonal binds, and the spline runs out of travel on my fathers lux with 2" lift at full droop of the suspension. Got a custom tailshaft coming for it, costing around $700.

just get a front shaft spacer, to bring the slip joint back to where it would be stock.