Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Flamin fab for low mount xp

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 156
Joined: Thu Feb 14, 2008 5:18 pm
Location: brisbane/Logan

Flamin fab for low mount xp

Post by biggsy »

I have a low mount 9500 xp warn winch.....6h/p...
Now, besides being a very long body winch can A Flamin Fab winch motor connector to run dual motors be installed.... I cant see why not..Just a suggestion as the xp is a tough winch and not that slow compared to a high mount but is a 1000 pounds more than the high mount..
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

I thought one of the winch trucks was running a similar setup.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 555
Joined: Fri Aug 03, 2007 11:10 pm
Location: port melbourne,vic

Post by flexytj »

i was wondering if it would fit the xp9.5ti
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

I think the 75 series cruser ute from rockampton XWC was running one.
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

nastytroll wrote:I think the 75 series cruser ute from rockampton XWC was running one.
Also with altered gearing to use the extra horsepower to full advantage.
That thing is quick!
Tetanus rolling on 37's
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Re: Flamin fab for low mount xp

Post by ludacris »

biggsy wrote:I have a low mount 9500 xp warn winch.....6h/p...
Now, besides being a very long body winch can A Flamin Fab winch motor connector to run dual motors be installed.... I cant see why not..Just a suggestion as the xp is a tough winch and not that slow compared to a high mount but is a 1000 pounds more than the high mount..
It can be done if you have the room in your bullbar to fit an extra motor plus adapter. The only down fall with running a lowmount is how much cable you can carry.

LudaCris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
Posts: 202
Joined: Thu Jan 10, 2008 7:27 pm
Location: rocky

Post by Wilba »

Hey Guys Billy Here
The same adaptor can be used on any motor that fits a warn.Just contact Wazza you`ll find him very good to talk to.Also there are other options that are tested now for the room problem and russ has a air free spool sorted out that works sweet as. The drum has been extended on my 9.5 for 2 years now no probs so far.Hope this helps
Cheers Billy.


ps not sure if you need the extra probs that go along with it without altering gearing,Try 24v standard 9.5 first mate it will snap standard plasma real quick like that.
Inya Racing..
Top
Posts: 240
Joined: Mon May 07, 2007 9:33 pm
Location: Sunbury, Victoria

Contact:
Contact The_Wazza

Post by The_Wazza »

Thanks Billy...

Just to let you all know the Adapter is $850 for a while. In time for those of you thinking about upgrading your winches for the new comp season.... after this, it goes back to $1300.

Any questions, let me know..... But Billy's your best bet to talk about what he thinks about the Twin Motor Low Mount!

Cheers, Wazza
www.flaminfabrications.com.au
Now available Faster Gearing for Highmounts!!!
0419 386 703
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests