Tyer Carrier for a 40 serise landcruiser

[pinky & Sar]

Has anyone got any aftermarket tyer carrier idea's for a 40 serise landcruiser. If anyone has any pic's or ideas that we could use i would much appreciate your input.

pinky & Sar

[Tojo]

what's wrong with the standard one?

[DIRTY ROCK STAR]

im guessing you dont have the std one or it isnt handling a wide tyre.

i had an afermarket one come with car so i used the part the tyre bolts to and then some 50x50 square tube down onto the chassis at the back.

but whatever you use make it extra sturdy amazing how much weight there is there.

[pinky & Sar]

the mounts are pulling out of the body cause it is to heavy

[TWISTY]

Hey Pinky & Sar,

I started drawing up a new rear bar and tyre carrier for my 40 this weekend. Hopeing to get it lasercut and built in a month or two. It'll be something along the lines of this one.






Could get a 2nd one built at the same time if your interested.

[shorty_f0rty]

made my own using some parts from the original wheel carrier.




hasnt fallen off yet and is pretty quiet too

[pinky & Sar]

how strong do u think the towbar will be. if u have finished it can i come and have a look at it

[shorty_f0rty]

theres plenty of pics here if you want a closer look.. not much else to it really.
http://www.phat42.com/gallery/v/the40/rearbar/

I plan to add more to the rear bar in the future (been to lazy).. want to add 2x m12's on each outer edge of the rear bar into the rear cross member to add some strength.. at the moment its got 6 x m12 high tensile bolts for the towbar holding on the rear bar into the rear cross member of the chassis.

i have snatched from the rear using the tow bar a few times since and its been fine.

[jessie928]

the mounts are pulling out of the body cause it is to heavy

what you need to do is make a stainless plate that goes from top to bottom on the outside between the carrier and the body, and then make other plates from the inside, fixes the problem.

JEs