Outer Limits 4x4 Board

Just wondering if anyone has cut there bundera into a tray....reason why im asking is cause im running 35 x 12 mtr's and they hit on the inside of my wheel arches, i could just get ofset rims but i reckon this would be more fun, better power to weight ratio as well, anypics people???

do it and show us the pics.

i am guessing it wood look like a 75 series tray back but shorter ??? but do it and show us the pix it will b cool

i concur...! SWB 73 Series Ute

i have one, its a bundy soft top...... already engineered.
just offset the rims.........

is it difficult to get body mods engenired?

why not cut out the standard wheel tubs, and remake them larger? like they do for drag cars, i have had this though in my head or ages, just looking for a car to play with the idea on, its not hard.......do it for us.....

get wider offset wheels and/or run spacers on the back offroad - unless you want to spend big. the bundera suspension does not flex well, if you want a flexy coil cab 7x series cruiser, get an old 75 series and go 4/5 link rear with a shortened frame and short alloy tray, more economical than chopping into a bundy body.

whats ur suspension like to rub 35's? body lift, offset on rims?

yeah hes got 2 inch body and 2 inch springs. 15x8 landcruiser offset rims (my old ones)

got king coils, there 50mm lifted ones, they are not as good as i though they would be. just a stiffer spring rate, i found the stock coils worked better as they were more droop. when me bundys sitting on the flat i can just put my hand down between wheel and chasis, anyone else having this problem as it criples me off road!!??

here's the famous bundy flex thread...

http://www.outerlimits4x4.com/PHP_Modul ... ndera+flex

enjoy.