Jimny Wheel bearing adjusting nut tool
Posted: Mon Jan 12, 2009 6:06 pm
Hey guys, Just wondering where sells the Tool for adjusting the nut on the jimny front wheel bearing set up..... If not ill just make one...
Outer Limits 4x4 Board
Aussie Hardcore Wheelers
https://outerlimits4x4.com.au/
Jimny Wheel bearing adjusting nut tool
Page 1 of 1
Posted: Mon Jan 12, 2009 6:29 pm
once a jimny collar is tight, its tight. they are not like normal taper rollers as they have no pre-load and are not adjustable as such.
Posted: Mon Jan 12, 2009 7:20 pm
But that nut should still come off though, Im only taking it off to machine the lip off for the auto hub seal, so i can fit manual locking hubs.... CHeers 
Posted: Mon Jan 12, 2009 7:21 pm
more than likely the tool will be genuine only. or get someone to fab one up.
Posted: Mon Jan 12, 2009 11:01 pm
Ah i can fab one up piece of piss. if i could have bought one i would have though lol