FJ40 Landcruiser V6 Conversion
Posted: Tue Jan 13, 2009 6:09 pm
Im wanting to find information on a V6 conversion in a FJ40 Landcruiser. It is a SWB Trayback.
Outer Limits 4x4 Board
Aussie Hardcore Wheelers
https://outerlimits4x4.com.au/
FJ40 Landcruiser V6 Conversion
Page 1 of 1
Posted: Tue Jan 13, 2009 7:10 pm
honestly wouldnt bother the v6 will be revving its tits of and not moving anywhere keep with a straight 6 like a falcon motor i wanna do one in my 60 but will work out better with my 3f for wat im after
Posted: Tue Jan 13, 2009 7:48 pm
2FTEbrentz wrote:honestly wouldnt bother the v6 will be revving its tits of and not moving anywhere keep with a straight 6 like a falcon motor i wanna do one in my 60 but will work out better with my 3f for wat im after
Posted: Tue Jan 13, 2009 7:52 pm
dont have any info on the v6 sorry but the amount ul spend on converting it i think ul be disapointed stick with a straight 6 or v8
Posted: Tue Jan 13, 2009 8:01 pm
ditto on the straight 6 . If you go a v8, go a chev.
V6 Convertion
Posted: Wed Jan 14, 2009 4:50 pm
In that case Does anyone know where I can get a F motor or 2F motor, as bottom end in F motor needs rebuild so Im weighing up the cost. Iam looking at putting car up for sale in near future. (Bribie Island, will Travel 3 hrs)
Posted: Wed Jan 14, 2009 5:06 pm
get a 2f
should be plenty at wreckers
should be plenty at wreckers
Posted: Wed Jan 14, 2009 6:49 pm
Yep put an ad in the wanted section. Theres bound to be someone on here looking to offload one sitting in their corner.
Posted: Thu Jan 15, 2009 10:45 am
Got a good running 3f currently in my FJ40 that I'm looking to sell in the coming months. Have got a Ford 250 efi crossflow ready to swap in.
Only replacing the 3f to get efi. Welcome to come see it running and take it for a drive etc.
PM if interested.
Only replacing the 3f to get efi. Welcome to come see it running and take it for a drive etc.
PM if interested.