Outer Limits 4x4 Board

12V DC PERFORMANCE SPECS 8274-50 [old high mount]
Line Pull
Lbs.(Kgs.) Line Speed
FT./min(M/min.) Motor
Current Pull by layer
layer/Lbs(Kgs.)
0 73.4(22.4) 55 amps 1/8000(3629)
2000(910) 22(6.71) 190 amps 2/7460(3384)
4000(1810) 12(3.66) 275 amps 3/6980(3166)
6000(2720) 9.50(2.90) 350 amps 4/6620(3003)
8000(3630) 6.10(1.86) 450 amps 5/6290(2853)



12V DC PERFORMANCE SPECS 9.5XP [new low mount]
Line Pull
Lbs.(Kgs.) Line Speed
FT./min(M/min.) Motor
Current Pull by layer
layer/Lbs(Kgs.)
0 38(11.6) 70 amps 1/9500(4313)
2000(910) 16.8(5.1) 175 amps 2/8650(4927)
4000(1818) 12.8(3.9) 262 amps 3/7920 (3595)
6000(2720) 10.1(3.1) 335 amps 4/7400(3359)
8000(3630) 8.8(2.7) 425 amps 5/6940(3150)
9500(4310) 7.6(2.3) 480 amps

that's hard to read

hopefully this works...

I'd still go with a Spur Gear Design.

the old high mount still pulls at twice the speed to keep the cable tight when driving at the same time so it still looks like its the one to get.
now...i wonder if thr 6 hp motor will fit in place of my old 2.5hp motor

can u find the specs for the xp on the net somewhere, went to get a price today and the dealer called ateco (importer) and Arb and neither had specs.
warn site doesnt really tell much, just curious if the info is out there.

can u find the specs for the xp on the net somewhere, went to get a price today and the dealer called ateco (importer) and Arb and neither had specs.
warn site doesnt really tell much, just curious if the info is out there.