Outer Limits 4x4 Board

Posted: **Thu Jan 15, 2009 10:18 am**

what brands are ther? are any better than others?

Posted: **Thu Jan 15, 2009 3:41 pm**

I know EFS do a kit for about 3'' with extened shackels it flexes really well, and rides good to... hope this helps

Posted: **Thu Jan 15, 2009 6:38 pm**

There is only one 'real' 4" spring lift (ie. 4" lift springs without shackle lift) available in Aus. http://www.offroad4x4.com.au/ The lift isn't listed on their website, but they do sell it. The springs are made by Belton, the same company tht make OME, Rockcrawler and most likely a lot of other brands. Hobzee www.4h.com.au was also selling the kits on Ebay.

Posted: **Sat Feb 07, 2009 11:13 am**

Red Dog 4x4 wrote:I know EFS do a kit for about 3'' with extened shackels it flexes really well, and rides good to... hope this helps

I had one of them 4" inch kits i would not give it my worst enemy,it was 3"spring 1"shackels only lifted may be 3" all up dident last long till shocks faded springs saged all over.

Posted: **Sat Feb 07, 2009 2:19 pm**

Why not go spring over?

Posted: **Sat Feb 07, 2009 2:53 pm**

joel HJ60 wrote:Why not go spring over?

was thinking about that but i think it might get too high, and may get expensive.

Posted: **Sat Feb 07, 2009 6:05 pm**

How old/sagged are the springs you have at the moment?

I don't think cost will be an issue.

Posted: **Tue Feb 10, 2009 6:48 am**

joel HJ60 wrote:How old/sagged are the springs you have at the moment? springs around 1.5 -2" lifted and ext shackels.

I don't think cost will be an issue.

may need hi steer kit around 1100$-1300$ as off side spring hits steering, and prob need vic roads inspection 500-1000$ i gess. i can weld my self but havent got tickets. but if you know a better way might look at it. thanks

Outer Limits 4x4 Board

4'' inch lift springs l/c 60 series

4'' inch lift springs l/c 60 series