Outer Limits 4x4 Board

Posted: **Thu Jan 15, 2009 4:42 pm**

ive managed to spring the thread in which the bolt goes into to hold the spedo cable to the tcase. im thinking of just redrilling and taping to m6?

Posted: **Thu Jan 15, 2009 5:27 pm**

hellie coil it

Posted: **Thu Jan 15, 2009 6:17 pm**

jimbo jones wrote:hellie coil it

what?

Posted: **Thu Jan 15, 2009 6:20 pm**

http://au.youtube.com/watch?v=RFYa6sjhh_E

Posted: **Thu Jan 15, 2009 6:32 pm**

where do i get a set? and is it worth it?

Posted: **Thu Jan 15, 2009 6:34 pm**

any engenering shop should sell em about $20 a kit I think

Posted: **Thu Jan 15, 2009 6:36 pm**

do you know the size of the bolt and thread?

is it worth doing? wouldnt taping it out be easyer?

Posted: **Thu Jan 15, 2009 10:05 pm**

M6x1.0 is what you need, not a good idea to drill and resize the bolt has a small point on it to locate the cable better using the correct bolt with heli coil

Posted: **Thu Jan 15, 2009 10:27 pm**

plus if you stuff it again you dont have to keep going to bigger size bolts

Posted: **Fri Jan 16, 2009 10:30 am**

does anyone know what thread type and size the bolt is?

Posted: **Fri Jan 16, 2009 4:00 pm**

i sell recoil kits at my work.

a full repair kit for m 6 x 1 our RRP $45+
the kits contain tap and 10 inserts.

they're easy as to use. they tell you exactly what size to drill it too. tap it. insert the helicoil insert and *bam* your good as new.

i would definately go this option if it were me.

weaves.

Posted: **Fri Jan 16, 2009 4:05 pm**

yer im going to heli coil it but i dont know what size bolt it is. i dont have the case with me as it away getting fixed

Posted: **Fri Jan 16, 2009 4:21 pm**

brendan dude as two people above have said its
metric 6mm with a 1mm pitch
cheers andrew

Posted: **Fri Jan 16, 2009 4:36 pm**

o sorry thanks

Outer Limits 4x4 Board

striped tcase speedo holder bolt thread

striped tcase speedo holder bolt thread