Outer Limits 4x4 Board

Here is my problem! I have a SWB patrol which I got cut into a style side ute in Queensland, bucket seats put in and 2 inch body lift also put in. All done through an engineer, mod plated and all that good stuff. Now a couple of years later I move to Albury in NSW and seek registration for my 4x4, thinking that it being engineered already it wouldnt be a problem. Well so the RTA tells me today, "Sorry, your going to have to have the whole car engineered again"!!!! The car ran out of QLD rego in March last year, (I wasnt driving it due to being away from home for about 9 monthe) otherwise I wouldnt bother changing it. But now im home for a while I need the car rego'd again, but am going to have to pay a engineer $500 to look at the QLD Transport mod plate and replace it with his own!

Any suggestions?

Thanks guys.

pay them $500 so they can look at the QLD Transport mod plate and replace it with their own.

I reckon just pay them $500 so they can look at the QLD Transport mod plate and replace it with their own.

IMO, pay them $500 so they can look at the QLD Transport mod plate and replace it with their own.

You could try paying the $500 dollars so they can look at the QLD transport mod plate and replace it with there own!!!!!!!!!

I'd pay them $500 to look at the QLD mod plate and replace it with their own

Well it seems I should pay the $500 so they can look at it and replace it with there own! Thanks guys!

Spend $500 bucks on a holiday to QLD and re-rego it while there