Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

diff centre

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 356
Joined: Sun Jan 01, 2006 12:47 pm
Location: geelong

diff centre

Post by ronoor »

i have a 92 sierra with a shagged centre .i have a spare car a 88 w/t plastic flairs, the centre out of this car has smaller flanges can they be swaped over ? .cheers ron
Top
Posts: 578
Joined: Fri Feb 15, 2008 9:07 am
Location: st hellens

Post by jonno_racing »

ok at a guess no... well it will fit etc BUT wrong ratio...
[quote="jessie928"]
maybe you shoudl find something better to do other than diminishing your own view of your own idaquecies and inperfections by concerntrating on others ;)[/quote]
Top
Posts: 52
Joined: Fri Aug 24, 2007 2:44 pm
Location: Brissie

Post by Bad_Zook »

your 92 is widetrack correct? if so- the answer is no.. your n/t will have 3.9 gears.. your wt 3.7's.. you would need to change both front and rear...

i assume your saying that your gears are shagged?
Top
Posts: 356
Joined: Sun Jan 01, 2006 12:47 pm
Location: geelong

Post by ronoor »

Bad_Zook wrote:your 92 is widetrack correct? if so- the answer is no.. your n/t will have 3.9 gears.. your wt 3.7's.. you would need to change both front and rear...

i assume your saying that your gears are shagged?


they are both W/T but have diffrent flanges can i swap the the flanges thats the question. not ratios. cheers ron
Top
Posts: 73
Joined: Mon May 23, 2005 7:17 pm

Post by DSzuke »

Yes. The flanges should just swap over (if you can get them off :lol: )
Top
Posts: 356
Joined: Sun Jan 01, 2006 12:47 pm
Location: geelong

Post by ronoor »

spline is a diffrent size found out the hard way ,so a 88wt wont fit the 89 onwards. cheers ron
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

ronoor wrote:spline is a diffrent size found out the hard way ,so a 88wt wont fit the 89 onwards. cheers ron
Fronts and rears are different spline count, bit all years of leafy 1.3's sierra's have the same axles diameter and spline count. 26 spline rears and 22 or 23 spline fronts (cant recall exactly which)

1 litres are smaller and will not physically bolt in to a WT housing.

Marutis are weird
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 2 guests