Page 1 of 1
enginre numbers
Posted: Mon Jan 19, 2009 6:22 pm
by lammychop
after not being able to sort my clutch due to having a non feroza flywheel ive got to try and find out what engine i have fitted but i cant find the engine numbers where are they located on the feroza
Posted: Mon Jan 19, 2009 7:09 pm
by MightyMouse
Engine type cast into block exhaust side under No.4 cylinder.
"HD" is 1600
"HC" is 1300
Not certain if engine numbers will easily differentiate so use block ID as above
Posted: Mon Jan 19, 2009 7:50 pm
by lammychop
well ive just looked and its a hd 1600 what cars had this engine and did they have slightly smaller preasure plate mounts on the flywheel than the feroza
Posted: Mon Jan 19, 2009 10:31 pm
by nebivedu
that would be daihatsu aplause.
Posted: Mon Jan 19, 2009 10:59 pm
by lammychop
ok so if i get a feroza flywheel will this bolt on ok and will the aplause starter moter be ok on a feroza flywheel
Posted: Tue Jan 20, 2009 12:20 am
by lammychop
well we managed to get some numbers from the old clutch and it seems the clutch is from a diahatsu grand move
dont know if you guys have them over there but we do in the uk
Posted: Tue Jan 20, 2009 6:32 am
by MightyMouse
Ok thats' what I suspected - its not the corect clutch........
The "Grand Move" rings a bell but I'm uncertain if we got them, or even what they looked like.
As stated the HD/HE clutches share the same flywheel no matter if its a Feroza/Appluase/Charade in my experience. Try that path - its worked for me in the past.
In fact my old competition Applause clutch is now on another members Feroza.... it bolted up without problems also - so the supporting evidence is pretty strong.
Hope it works out.
Posted: Tue Jan 20, 2009 7:07 am
by lammychop
yeah its a foroza clutch but a grandmove engine/flywheel must be the only hd engine with a different flywheel holes thats my luck
Posted: Tue Jan 20, 2009 7:27 pm
by nebivedu
MightyMouse wrote:
As stated the HD/HE clutches share the same flywheel no matter if its a Feroza/Appluase/Charade in my experience. Try that path - its worked for me in the past.
Nope. HDC feroza has bigger flywheel and bigger clutch than applause HDC (from first hand - i had to change flywheel and clutch from feroza to applause engine)
Posted: Tue Jan 20, 2009 9:27 pm
by MightyMouse
Interesting - we never got the "C" variants of Feroza's, Applauses or Charades. AFAIK all ours were EFI - and I didn't actually mention "C" variants...
Perhaps he's getting confusion from "E" and "C" version Feroza's - He never actually stated what he's got, and your explanation might be the answer.
And why would you put a Feroza Clutch on an Applause as you stated anyway ?
Posted: Tue Jan 20, 2009 10:09 pm
by lammychop
well i didnt know it had an engine change i ordered a foroza clutch and it seems i have a grandmove engine fitted hence why it wont fit
Posted: Tue Jan 20, 2009 11:04 pm
by nebivedu
i get an applause engine for 100 eur, because a feroza engine cost 400 to 600 eur in our country. So i put an applause engine in my feroza.
Posted: Wed Jan 21, 2009 8:42 am
by MightyMouse
Yes - that's about the ratio of costs for Feroza to Applause here as well.
Seeing as the core engine is identical except for the cam its a MUCH more sensible option IMO.