Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
L28 timming issues
L28 timming issues
Ive just replaced the head on a l28 and the timing chain is all set properly buy the Manuel but im having trouble trying to find number 1 on the dizzy cap. From what ive worked out you can just about have number 1 anywhere as long as you change the leads around but I cant seem to get the car running smooth. what I want to know where should number 1 point on the dizzy cap. Hope you can help.
yeah i tryed that but i cant seem to get it right .when i turn it off and try to start it again it sounds like the timming is still out and when i turn the dizzy cap to pull it up and rev it it backfires a bit and the timming light says it timmed. i cant work this thing out.sledheadak wrote:put #1 cylinder at top dead center on compression stroke.take off the distributor cao and see wheres its pointing and run you wires per firing order from there
Who is online
Users browsing this forum: No registered users and 0 guests