Outer Limits 4x4 Board

Going to remove my bodylift, so went to shed to find originals. As I only moved interstate 2 weeks ago, this was quite difficult.

In short, I finally found 10 bolts about 8 mm thick and 100mm long.
Are these it?

If not, can someone send me the factory bolt lengths so I can get some new ones.

Cheers
Daniel

http://www.outerlimits4x4.com/phpBB2/ft ... ight=bolts

might help...

Just did a lift on mine. Standard bolts that came out were 1/2" unf thread at 120mm long. This leaves about 10-20mm of exposed thread once tightened up.
Hint: Use new Ny-lock nuts rather than re-using the old ones.

Cheers
Dave