Outer Limits 4x4 Board

just hoping to get some advice and hopefully some pics of what needs to be done in way of a roll cage to compete in qld comps, from tuff tracks to xwcs i have a good quality pipe bender and notcher also quite handy with the mig!!

the vehicles in questions are a mq wagon and a gq wagon probably only look at a four point internal cage if that complies.

ALL help appreciated.

regards mq308lwb

Here is some CCDA stuff that might help.

Here is the CCDA Manual

CCDAFWDManualMotorSportV8.pdf

Here is a link to the extreem winch challenge rules

http://www.xtreme4x4sport.com.au//Xtrem ... s-2009.php

has some stuff about roll protection.

Here is a direct link to the pdf of the roll cage pics

rotectionDrawingMaster060428.pdf

thanks guys gr8 help already!

any pics of how to fix to the floor??

weld or bolt?

can any sections be removable for streetability?

thanks again for the links etc!

--------------------------------------------------------------------------------
thanks guys gr8 help already!

any pics of how to fix to the floor??

weld or bolt?

can any sections be removable for streetability?

thanks again for the links etc!


any further help with the above questions???

or possible a contact to discuss