Does anyone happen to have or know where I could get hold of a second hand distributor? I believe the electronic internal components of mine are dead.
Can a distributor from an older model Suzuki fit on a 1.3lt?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Help my Distributor has died - now fixed
Help my Distributor has died - now fixed
Last edited by Barathrum on Thu Apr 01, 2004 9:47 pm, edited 1 time in total.
Pick-up assembly here in the US is $200+
See here...
http://www.partsamerica.com/SelectParts ... p%2FStator
Get the whole distributor for $165US.
See this...
http://www.partsamerica.com/PartDetails ... 18&PTSet=A
See here...
http://www.partsamerica.com/SelectParts ... p%2FStator
Get the whole distributor for $165US.
See this...
http://www.partsamerica.com/PartDetails ... 18&PTSet=A
My tires were rubbing in the front, so I trimmed the hood, and now they're fine...
Got it all sorted out today, it turns out my initial worries about the pickup coil inside the distributor be faulty turned out to be wrong. Even though the coil appeared to be functioning properly, its output was fine and it pulse tested ok, it was still not right.
It turns out my (now former ) mechanic replaced my old coil some time ago he used the wrong one. He used a coil that was meant to be used in a system that had a resistor present in it. My zook has no such resistor. Subsequently when the coil was replaced with the correct one it now functions perfectly. At least it hasn’t appeared to cause any damage pickup coil. It doesn’t explain why it functioned perfectly fine for several months and just now decided to stop.
So thanks love_mud and mtzook but I’m now back on the road
It turns out my (now former ) mechanic replaced my old coil some time ago he used the wrong one. He used a coil that was meant to be used in a system that had a resistor present in it. My zook has no such resistor. Subsequently when the coil was replaced with the correct one it now functions perfectly. At least it hasn’t appeared to cause any damage pickup coil. It doesn’t explain why it functioned perfectly fine for several months and just now decided to stop.
So thanks love_mud and mtzook but I’m now back on the road
Who is online
Users browsing this forum: No registered users and 0 guests