Page 1 of 1
MQ/MK H233 Rear diff in G60
Posted: Sat Jan 24, 2009 11:50 pm
by Swerve
--------------------------------------------------------------------------------
Just letting those know that the H233 MQ/MK rear diff bolts straight up to your G60.
http://www.rmp-o.com/phpbb/viewtopic...=634&start=320
Havn't started the front but I expect it also to bolt straight up.
Steve
MQ Diffs into G60
Posted: Sun Jan 25, 2009 9:30 pm
by BLUE MQ
Hi Swerve,
yes the front diff will bolt straight in also, make sure you use an MQ brake master cylinder as well, I did the MQ diff conversion on my old G60 about 2 years ago and never looked back, actually had good working brakes on it, also i put an LSD rear diff in mine. The only needed was to machine the flangees out on diffs to suit the oridginal G60 driveshafts.
Posted: Sun Jan 25, 2009 10:51 pm
by Swerve
Blue MQ,
Thanks mate !!! Hmm was going to try the original G60 Master cyl (power brakes) but i have a brand new MQ Master cyl instorage.
Will check the master cyl diam 1st as the G60 master and slave cyl are all 25.4mm (1") Will check on PRB later on what a MQ is (stuff it will do it now)
MQ is 23.81 mm and G60 is 25.40mm
Think now as I have the MQ cyl laying around I'll use it !!!
My diffs have detroits in both front and rear. Also have a ARB air for the rear. I am seperating the G60 tailshaft at the uni and grafting on the flange from a MQ as both MQ and G60's use th same uni
