Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
hilux rear center flip
Moderators: toaddog, Elmo, DUDELUX
hilux rear center flip
is there any way of flipping the rear center of a hilux for more drive shaft clearance will the axels still line up in the center just want to no if it can be done
toyota 80#,d/cab ute chop,6" springs,20mm body lift, 315/75/16 muds, and 39" michelin XML play tyres , turbo 4.2 1HZ top mount intercooler diesel.now ENGINEERED.
Reece
Reece
Just put a high pinion centre out of a Bundera, 100 series, etc front diff. Don't know how strong it will be in the rear but I run one in the front of my comp truck. Broke 2 in one day with stricky tyres. Had no worries when I ran Simex's.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
as willy says you can use a high pinion from a 80/105/bundera however it will be running backwards so if you have crawler gears or big tyres you will probably break it.
it only raises the tailshaft, it doesn't raise the lowest point which is the bump in the bottom of the axle housing, you can shave an inch or so off there if you're keen.
it only raises the tailshaft, it doesn't raise the lowest point which is the bump in the bottom of the axle housing, you can shave an inch or so off there if you're keen.
Free air locker to the first 20 callers!
Who is online
Users browsing this forum: No registered users and 1 guest