Outer Limits 4x4 Board

Have removed the Vacuum and Injector pump from my 96 GQ and sent the pump off for repair.... Doing a big clean up before I start work again and found these laying under the front of the truck!!

No bloody idea what they are or where they came from either

dude that 1 on the right looks like a router bit

take a photo next to a ruler lol its hard to say how big they are, where did you find em? the one on the left can be a few things....how big are they?

they both look like routers bits man.
right. cutting.
left is for spacing the router off the timber.

Beats the hell out of me No router to have bits laying around for here for miles and the hex is straight cut and not at all sharp. Apologies for the shaky pics... taken pre coffee this morning! I did discover that the 'hex' is a nice slip fit inside the 'button' though

I reckon router bits as well.

Nope!!
They aint router bits...
They came out of the injector pump head after you removed the injector pipes from the rear of injector pump when you took it off motor.
Dont worry about them tho....these little widgets are automatically replaced when the pump is overhauled.
How do I know this???
Just had mine done ...and 6 of these little doovers were part of the stuff they gave me in a plastic bag after I parted with $1800 bux for o/haul.

Cheers Keith

i thought they were too small to be router bits, and the shafts that go in the router arent long enough? imo anyway

ST391GQ wrote:Nope!!
They aint router bits...
They came out of the injector pump head after you removed the injector pipes from the rear of injector pump when you took it off motor.
Dont worry about them tho....these little widgets are automatically replaced when the pump is overhauled.
How do I know this???
Just had mine done ...and 6 of these little doovers were part of the stuff they gave me in a plastic bag after I parted with $1800 bux for o/haul.

Cheers Keith

makes it seem worthwhile doesnt it, that little bag of useless doo-daas

ST391GQ wrote:Nope!!
They aint router bits...
They came out of the injector pump head after you removed the injector pipes from the rear of injector pump when you took it off motor.
Dont worry about them tho....these little widgets are automatically replaced when the pump is overhauled.
How do I know this???
Just had mine done ...and 6 of these little doovers were part of the stuff they gave me in a plastic bag after I parted with $1800 bux for o/haul.

Cheers Keith

Mate! Thank you
I owe you a slab
At least I can sleep at night now

Slug wrote:

ST391GQ wrote:Nope!!
They aint router bits...
They came out of the injector pump head after you removed the injector pipes from the rear of injector pump when you took it off motor.
Dont worry about them tho....these little widgets are automatically replaced when the pump is overhauled.
How do I know this???
Just had mine done ...and 6 of these little doovers were part of the stuff they gave me in a plastic bag after I parted with $1800 bux for o/haul.

Cheers Keith

Mate! Thank you
I owe you a slab
At least I can sleep at night now

No Probs M8...glad I could help out hey
I will take you up on that ...when I finally get to the Territory on one of my extended inland exploring trips in the future.

Cheers Keith