Spare wheel shovel carrier
Posted: Fri Apr 02, 2004 8:43 am
Does anyone know who makes these, thought Kaymar might but apparently not.. TIA
-Miz
-Miz
Outer Limits 4x4 Board
Aussie Hardcore Wheelers
https://outerlimits4x4.com.au/
Spare wheel shovel carrier
Page 1 of 1
Posted: Fri Apr 02, 2004 8:50 am
yeah kaymar do. i was actually looking at one the other day when i was at the local 4by shop.
Posted: Fri Apr 02, 2004 1:20 pm
Kaymar definately make them, I just ordered one for my truck.
Re: Spare wheel shovel carrier
Posted: Fri Apr 02, 2004 1:30 pm
M1S3RY wrote:Does anyone know who makes these, thought Kaymar might but apparently not.. TIA
-Miz
CJ 4wd accessiries in Ferntree gully....
Posted: Fri Apr 02, 2004 5:13 pm
greenfourby wrote:Kaymar definately make them, I just ordered one for my truck.
What are they worth?
-Miz
Posted: Fri Apr 02, 2004 5:34 pm
Not sure what brand it was but I bought mine from SCS 4x4 in braeside they came in Alloy or steel.....................Dazz
P.s Mine holds both axe and shovel
P.s Mine holds both axe and shovel
Posted: Fri Apr 02, 2004 8:04 pm
They are actually made by Brown Davis in Bayswater cost about $160 from memory.
You can buy them direct of them, I think Kaymar just sell the Brown Davis ones.
I got one and it does the job.
Frank.
You can buy them direct of them, I think Kaymar just sell the Brown Davis ones.
I got one and it does the job.
Frank.
Posted: Fri Apr 02, 2004 8:46 pm
Brown Davis thats the one I now rember mine having a brown davis sticker on it before I had it powdercoated
Cheers Dazz
Cheers Dazz
Posted: Fri Apr 02, 2004 8:48 pm
Available through all ARB outlets, listed in the catalogue, made by Kaymar. Combination High lift and shovel holder.
Posted: Fri Apr 02, 2004 10:48 pm
Area54 wrote:Available through all ARB outlets, listed in the catalogue, made by Kaymar. Combination High lift and shovel holder.
mmm.... think that'll be the one thats attatched to the roof rack
Posted: Fri Apr 02, 2004 11:15 pm
Theres a good one if you have a roofrack.
You slide the handle into a spring loaded piece of pipe, then the head slots into a box section, and you can also have a bit of metal that clamps over the shovel head..
Had a rear wheel carrier one, sold it for cheap,
ya dont need 4 tons on the rear door on GQ, the hinges are weak as it is... weight of a 34/36inch tire, rim, spotty, shovel/axe/kitchensink etc etc
YMMV
You slide the handle into a spring loaded piece of pipe, then the head slots into a box section, and you can also have a bit of metal that clamps over the shovel head..
Had a rear wheel carrier one, sold it for cheap,
ya dont need 4 tons on the rear door on GQ, the hinges are weak as it is... weight of a 34/36inch tire, rim, spotty, shovel/axe/kitchensink etc etc
YMMV
Posted: Sat Apr 03, 2004 12:20 am
Kaymar Shovel holder,
ARB= $160 (if staff know what you're talking about...
)
TJM= $130 and can order in 2 days
ARB= $160 (if staff know what you're talking about...
)
TJM= $130 and can order in 2 days
Posted: Sat Apr 03, 2004 12:23 am
By the way, i have the Kaymar rear tyre hi-lift holder and it holds shovels fine. I think it was $120?
Posted: Sat Apr 03, 2004 1:04 am
I wouldn't be putting a high lift jack on the back. Then again I wouldn't bother carying a high lift jack any way.
Mate made me an axe and shovel holder the other week. Cost him about $10 in matterials. Seems to work well. I'll get it powder coated after Easter and put up a pic.
Mate made me an axe and shovel holder the other week. Cost him about $10 in matterials. Seems to work well. I'll get it powder coated after Easter and put up a pic.