Outer Limits 4x4 Board

I need some help from you guys

i am told these machines have a solid front axle, if ANYONE could take a pic/pics of thier front diff (particularly the trunion bearing and steering arm locations) I would be most appreciative, If there are existing pics, link them or post them!

thank you guys

BJ

MMMM .......... live axles , dam those IFS's

Hmm...don't think I'm going to be able to give you too much help :|

There is a spec sheet up at www.warfs.org but it isn't detailed. There are a few links from there and they may have pics of what you are after. Also, one Rocky dude from Northern QLD has or is getting his hands on the manual for the Rocky, maybe able to give you detailed info, check the members section for who (think he has some flex shots in there).

And if you find out what R&P ratio they run, let us know!!

Is this "rocky" machine essentially the same as your ferozas?

(forgive me if im commiting a mortal sin, like calling a landcruiser a jeep or similar)

IF it is then, IF someonw is getting specific photos could you rip some off of your steering box and steering box mounts?

cheers
rob

(thanks guys, quick responses!) ferwoaza and andy!

ALSO: can you all help this brutha out 8)

http://www.outerlimits4x4.com/PHP_Modul ... php?t=1638

he is after info, something i dont have on that machine!

Rob....PM BundyRumandCoke for the info you seek.

According to his Member Profile, he's just purchased a Rocky Workshop Manual.

Cheers

BJ a few things are similar but there are differences. The Rocky is solid axle front (but there is a model that has IFS, not sure how common they are in this country tho) and the Feroza's are all IFS. Hubs on the front are basically the same, discs same etc. I don't know with steering. I can nab some pics of what my Feroza has in the steering department this weekend if you like, I have to investigate a leak coming from that area anway...

NAH, i am particularly after the rocky details, the feroza is totally different in the steering i inspected one yesterday!

but thanks anyways murray!!

BJ :wink:

shhhh bubs, its secret squirrel business!

BJ i looked at one today - hard top - it is nothing like what we saw

now i need to find a stock ute - and a scat? early one

thanks bubs, i had deduced that, the utes are the same as the shorties,

im headed back in time

bj on roids wrote:thanks bubs, i had deduced that, the utes are the same as the shorties,

im headed back in time

thats what i think have a close look at this pic

bubs wrote:

bj on roids wrote:thanks bubs, i had deduced that, the utes are the same as the shorties,

im headed back in time

thats what i think have a close look at this pic

nup it wont be then :(

oh well

Got some pics today and it is not what we were looking for

i am not sure about the LC - but if it were a hilux arm the tie rod would be below the arm - not above like what we saw dudes

got to pics of the steering on the rocky in question here

BJ

Heres a pic that shows the front under my Rocky. http://groups.msn.com/AussieDaihatsuRoc ... PhotoID=43
My diffs are 3.36--(pinion 11/crown wheel 37)
Yes, my xmas pressie for myself was a workshop manual for a F75 Rocky, oh and the newish 2.8DLT with intercooler.
Havent been on here for yonks, but ya get that.

Cheers
David

Thanks to everyone, we have all the information now!

cheers!