Outer Limits 4x4 Board

Does anyone are there is any switch on the Transfer-Case of a Pajero Mk1 to illuminate the light on the instrutment cluster when in 4WD mode?

i thought there is a light somewhere on the gen ones?

Yea,there was an green coloured with a 4-wheel joined by 2 probshaft and a transfer-case logo light,just beside the right turn signal light!

Now even i shift to 4H or 4L,the light does not came on,when i crawl under the paj,i found there has 2 wire hanging around and being disconnected by somebody,then i connect 2 wire together then jump to the driver seat and turn on the ignition,the light illuminates!

The switch are spoiled i think,it has been sealed with some windscreen sealant i think(some blackie stuff),now it leaking gear-oil ,i think i wanna to replace it with a brand new switch and reconnect it to the light!

But i can't found it,where can i get it?

Anyway,thanks for the reply

I had to replace my transfer case electrical switch too after the wire was cut off and the switch got damaged. I don't exactly remember the online store where I bought it but I will come back here once I found the link.

if you peek under your transfer case, there are 2
switches with an electrical connector. IIRC one has to be
connected to the body, the other one is connected to
the other switch. tell me If you need a picture, I can
take one by monday. My paj is park at the office, so
I will be seeing it on Monday.