Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
factory locker vacuum problem
factory locker vacuum problem
just wondering if anyone can tell me how to disengage a factory locker that won't switch off? the Gregorys manual i have doesn't have anything on this part. i can't figure out how to switch it off. does the locker rely on vacuum to engage or disengage or both. cheers
gq with stuff
hey man. it relys on vacuum to both engage and dissngage.
If you think you having an issue with the solinoid, its on the passager fire wall, climb under you car when its running and pull the the two hoses off the vacuum unit and switch them around. then go for a slow drive, doing full lock one direction. Should disengage almost straight away. If not. dont push it too hard on a hard suface, or it may go pop.
If this doesnt work, you may find that the pin that is locking the diff in place has given up on you and seize. I'd try pulling it apart and cleaning it all, but other would say just hit it casing with a hammer a few times and, enither way, have the engine running, its still going to need that vacuum.
Hope this helps man
Nelly
If you think you having an issue with the solinoid, its on the passager fire wall, climb under you car when its running and pull the the two hoses off the vacuum unit and switch them around. then go for a slow drive, doing full lock one direction. Should disengage almost straight away. If not. dont push it too hard on a hard suface, or it may go pop.
If this doesnt work, you may find that the pin that is locking the diff in place has given up on you and seize. I'd try pulling it apart and cleaning it all, but other would say just hit it casing with a hammer a few times and, enither way, have the engine running, its still going to need that vacuum.
Hope this helps man
Nelly
Who is online
Users browsing this forum: No registered users and 74 guests