Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Right side tyers scruded out

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 1
Joined: Tue Mar 04, 2008 2:19 pm
Location: Brsbane

Right side tyers scruded out

Post by Cossy »

I have 2003 Patrol and the tyers scrud out (not wearing evening) the wheel alignment place said that evething is ok but the wear is only the right side I dont cary anthing heay on that side i only tow the van :cry: Any help please
Posts: 68
Joined: Tue Mar 11, 2008 10:41 pm
Location: Brisvegas

Post by SilverBulletBM »

tyre pressure could be low, the toe could be out and the alignment place may have a broken machine or not no wat there doin. Wheel bearings ok?
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

only the right side, do you for some reason do alot of left hand turns? i know it seems strange,

i know alot of people in a certain area of sydney that have tire wear problems due to the camber and roundabouts in their area,
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

has it been crashed or driven offroad hard? bent housing? but more importantly who is aligning it are we talking bob jane, beuerepairs gasp tyre factory or someone who actually knows what their doing?

I change alot of tyres on peoples cars due to being "aligned" by tyre shops instead of suspension specialists which results in better work most of the time.
My bitch has boost, Nutter Engineering Turbo GQ
Posts: 1443
Joined: Tue Apr 12, 2005 3:57 pm
Location: Brisbane

Post by vanbox »

How can one check if their housing is bent? I get abnormal wear on my left front. while the right front is the best tyre of the lot.

Who is recommended for wheel alignments/balance. I guess not the bigger chains?
MUD BEERS and MAYHEM

DURAMAX POWERED GU
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

vanbox wrote:How can one check if their housing is bent? I get abnormal wear on my left front. while the right front is the best tyre of the lot.

Who is recommended for wheel alignments/balance. I guess not the bigger chains?
depends where you are I use pedders in dandenong as I have a trade account and it doesn't matter how high or low the car is they will align it right, not to lazy to use shims on cars that need em etc......not all pedders stores are the same though!

as for diff straightness unless you can see a major bend i actually don't know how to tell unless its pulled apart and checked, intact on the car I don't know if its possible.
My bitch has boost, Nutter Engineering Turbo GQ
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests