Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

LN106 Power Steering

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

LN106 Power Steering

Post by Weiner »

Hi Guys,

Currently stockpiling all the stuff I need for power steering on my Hilux, and need to know what else I need before I get stuck into it.

It currently has no power steering, I have got a IFS box and Trailgear High steer stuff.

The IFS box and reservoir are off a 4Y I believe, came out of a 4 runner.

Thanks Aidan.

Image
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 632
Joined: Wed Sep 07, 2005 8:59 pm
Location: South Gippsland

Post by hiluxmad »

pitman arm?
think the 75 series? ones are flatter and give better clearance or is it 80 series?
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Top
Posts: 1650
Joined: Wed Jun 06, 2007 10:12 pm
Location: ipswich

Contact:
Contact sloshy

Post by sloshy »

Its the 80 series, but if you bought a kit it should have come with a pitman arm.
cheers Dan

Licenced Carpenter
I do everything, free quotes
Brisbane west/Ipswich/rural
PM me
Top
Posts: 595
Joined: Sat Nov 02, 2002 2:09 pm
Location: Blackbutt, Queensland

Post by v8zuki »

what motor you running
FOR SALE hilux parts all models
have most parts available from early to late
call mick 0415156693
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

2.8 Deisel, yes have the pitman arm that came with the box, and the TG one which I think is an 80 series one.

I need the mount for the power steering pump and a belt or so, but not sure what else.
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Spaners
That resivour may not work so best chase up one from a 2.8 or similer design. Also the belt to drive the pump and check if the harmonic ballancer has the pulley for the power steer. Those steel lines look like they may be off the runner just check that also.
plenty of parts on the bench
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

you have two pumps in that picture. One without a tank and one with a tank. The one with the tank looks like a 3rz pump.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

Sic Lux wrote:Spaners
That resivour may not work so best chase up one from a 2.8 or similer design. Also the belt to drive the pump and check if the harmonic ballancer has the pulley for the power steer. Those steel lines look like they may be off the runner just check that also.
Yeah the steel lines came with the box, so I will need ones for the 2.8
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

Willy Hilux wrote:you have two pumps in that picture. One without a tank and one with a tank. The one with the tank looks like a 3rz pump.
It came out of a 4y.

I will price the 3L reservoir and lines then.

Do I need a different arm that comes from the steering wheel?
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 3 guests